Commercial Coating Remover (Gel): Lifts urethanes, alkyds, siloxanes, and most two-component epoxies. Ideal for removing thick film concrete floor coatings. Use on nearly all substrates, including steel, aluminum, concrete, composite, and masonry.
Chemistry
Application
Characteristics
Excellent cleaning of soiled and chalked surfaces
Lower viscosity allows for self-leveling on horizontal surfaces
Will add 1 - 2 mils of surface profile on concrete after 5 - 6 hours of dwell time
Maintains the surface profile of metallic substrates that was present before application
Does not affect glass or rubber
Can be sprayed with standard equipment
Easy clean up with soap & water or denatured alcohol
Water-based, non-flammable
Flash Point: >221°F (105°C)
Freezing point: 32°F (0°C)
Boiling Point: 212°F (100°C)
pH 2
Coverage: 25 to 90 sq. ft. /gal. (theoretical)
Recommended uses:
Lifts epoxies, urethanes, siloxanes, architectural coatings, and powder coatings
Floor coating removal
Lifts lead containing alkyds while reducing hazardous dust in the work area as compared to sanding or grinding
Coating removal from many plastic and fiberglass surfaces (test patch required)
Commercial manufacturing and processing facilities
Any area where abrasive blasting is not an option for environmental or economic reasons or if damage to the substrate is a concern
