Healthcare Facilities
Healthcare Facilities
PPG Urethane Cement System can be paired with a variety of top coats for epoxy flooring in hospitals and other healthcare facilities. An easy to clean solution with optional Decorative Flakes and anti slip additives, architect and facility managers can find their protective floor coatings with PPG FLOORING.
4 Product Results
-
PPG FLOORING 100% SOLIDS POLYASPARTIC
PPG Flooring 100% Solids Polyaspartic coating provides application capability up to 20 mils, versatility for interior or exterior use with outstanding durability and protection for resistance to chemicals, stains, and damaging UV’s. It is used as a seal coat over broadcast floors of PPG Decorative Flakes or quartz and provides faster return-to-service than 100% solids epoxy topcoats.
-
PPG FLOORING 912 LV Epoxy Primer
Formerly known as Milamar ICO Primer LV
100% solids, low viscosity penetrating epoxy primer/sealer that can be applied to dry or partially damp surfaces
-
PPG FLOORING MOISTURE MITIGATING PRIMER
PPG Flooring Moisture Mitigating Primer is used to prevent adhesion issues by controlling vapor emissions. This 100% solids, two-component epoxy helps block vapor emissions up to 20 pounds/1000 feet/24 hours per ASTM F1869.
-
PPG FLOORING SELF-LEVELING URETHANE CEMENT
PPG Flooring Self-Leveling Urethane Cement provides a heavy duty seamless flooring system with higher builds that can be installed at 1/8” – 3/16” and broadcast to rejection with silica sand or quartz to achieve 3/16” – ¼” in thickness. The resulting flooring system offers high durability and resistance to impact, thermal shock, abrasion, chemical and moisture vapor transmission.