Mechanical Equipment Room
Mechanical Equipment Room
Protecting the flooring of Mechanical Equipment Rooms (MER) presents a unique set of challenges, with hazards including moisture, temperature, chemicals, and vibration. An effective coating system should deliver waterproofing that must not fail under these conditions. The PPG FLOORING MER System begins with Epoxy Primer, then builds with Epoxy Waterproofing Membrane and two-component Epoxy Topcoat to meet MER needs.
19 Product Results
431 MMA Binder
Formerly known as AC313 Binder Resin
PPG Flooring 431 Binder Resin is a 100% reactive curing acrylic resin binder coat for self-leveling, broadcasted and troweled mortar systems.
682 MMA Sealer
Formerly known as AC826 Sealer Resin
PPG Flooring 682 MMA Sealer Resin is a fast set, low-viscosity acrylic resin top coat sealer designed for areas with high exposure to water
920 MMA Primer
Formerly known as AC200 Primer Resin
PPG 920 MMA Primer Resin is a non-pigmented, low-viscosity acrylic resin for use as a primer in MMA systems
Formerly known as Milamar ICO Guard Coating
Ultra high solids, epoxy coating primarily for protecting concrete surfaces in corrosive environments
Formerly known as Milamar ICO Hi Guard Coating
Two-component, 100% solids, chemical resistant novolac epoxy coating.
PPG Flooring 2550
Formerly known as Milamar PM550 Waterborne Urethane Coating
Two-component, water-borne aliphatic urethane coating
PPG Flooring 610 SL
Formerly known as Milamar ICO Floor Coating
Two-component, self-priming and self-leveling epoxy coating
PPG Flooring 618
Formerly known as Milamar PM 180 Elastomeric Epoxy
Two-component, 100% solids, multi-purpose, elastomeric epoxy
PPG Flooring 688 Polyaspartic
Formerly known as Milamar PM 880 Polyaspartic
Two-component, aliphatic polyurea/polyaspartic floor coating
PPG Flooring 833 CR
Formerly known as Milamar 3300 CR Flooring System
Three-component, 100% solids, floor coating system designed for trowel application
PPG Flooring 912 LV
Formerly known as Milamar ICO Primer LV
100% solids, low viscosity penetrating epoxy primer/sealer that can be applied to dry or partially damp surfaces
PPG FLOORING CONCRETE EPOXY PRIMER
PPG Flooring Concrete Epoxy Primer is a low viscosity, 100% solids, zero VOC, blush resistant epoxy primer. PPG Flooring Concrete Epoxy Primer enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and pinholes that may occur when coating porous surfaces.
PPG FLOORING DECORATIVE FLAKE
PPG Flooring Decorative Flake additive is a decorative, multi-colored blend of vinyl flake designed for use in conjunction with the installation of the PPG Flooring Self-Leveling floor coating system. The PPG Flooring Decorative Flake vinyl flake additive is installed as a sprinkle or full broadcast application over freshly applied PPG Flooring Self-Leveling Epoxy.
PPG FLOORING EPOXY CRACK FILLER
Epoxy filler compound
PPG FLOORING EPOXY TINT PACK
PPG Flooring Epoxy Tint Packs are designed to be easily mixed into PPG Flooring Epoxy-based products for in-field tinting and application. The Epoxy Tint Packs are 100% solids, low VOC and provide excellent color consistency and stability.
PPG FLOORING MOISTURE MITIGATING PRIMER
PPG Flooring Moisture Mitigating Primer is used to prevent adhesion issues by controlling vapor emissions. This 100% solids, two-component epoxy helps block vapor emissions up to 20 pounds/1000 feet/24 hours per ASTM F1869.
PPG FLOORING SELF-LEVELING EPOXY
PPG Flooring Self-Leveling Epoxy is a 100% solids, high-build epoxy floor coating designed to provide seamless application and durability for concrete protection. Combine with decorative flakes, quartz, or non-slip additives to create a non-skid surface.
PPG FLOORING SELF-LEVELING URETHANE CEMENT
PPG Flooring Self-Leveling Urethane Cement provides a heavy duty seamless flooring system with higher builds that can be installed at 1/8” – 3/16” and broadcast to rejection with silica sand or quartz to achieve 3/16” – ¼” in thickness. The resulting flooring system offers high durability and resistance to impact, thermal shock, abrasion, chemical and moisture vapor transmission.
PPG FLOORING WEAR RESISTANT URETHANE
PPG Flooring Wear Resistant Urethane is a high solids, high durability coating that provides excellent abrasion, chemical, and impact resistance. The flexible, coating offers excellent UV stability in a non-skid Satin finish.