Flooring
Flooring
High-performance flooring systems for a wide variety of environments.
From general purpose epoxy flooring to specialized systems for severe environments, count on PPG FLOORING™ for the right protection and the right technical support for your application. Use the PPG FLOORING Systems brochure and speak with your PPG rep to design a system that’s right for you. Available in US/Canada only.
30 Product Results
-
AC200 PRIMER RESIN
PPG AC200 Primer is a non-pigmented, low-viscosity acrylic resin
-
AC313 BINDER RESIN
AC313 Binder Resin is a 100% reactive curing acrylic resin binder coat for self-leveling, broadcasted and troweled mortar systems
-
AC826 SEALER RESIN
AC826 Sealer Resin is a 100% reactive, fast set, low-viscosity acrylic resin designed for areas with high exposure to water
-
PPG FLOORING 100% SOLIDS POLYASPARTIC
PPG Flooring 100% Solids Polyaspartic coating provides application capability up to 20 mils, versatility for interior or exterior use with outstanding durability and protection for resistance to chemicals, stains, and damaging UV’s. It is used as a seal coat over broadcast floors of PPG Decorative Flakes or quartz and provides faster return-to-service than 100% solids epoxy topcoats.
-
PPG Flooring 2550 Waterborne Urethane Coating
Formerly known as Milamar PM550 Waterborne Urethane Coating
Two-component, water-borne aliphatic urethane coating
-
PPG Flooring 412 CS Coating System
Formerly known as Milamar 1200 CS Coating System
Three-component, novolac epoxy coating system designed to control electrostatic discharge
-
PPG FLOORING 610 SL
Two-component, self-priming and self-leveling epoxy coating
-
PPG FLOORING 618 EPOXY COATING
Two-component, 100% solids, multi-purpose, elastomeric epoxy
-
PPG FLOORING 688 POLYASPARTIC
Two-component, aliphatic polyurea/polyaspartic floor coating
-
PPG Flooring 833 CR
Formerly known as Milamar 3300 CR Flooring System
Three-component, floor coating system designed for trowel application
-
PPG FLOORING 912 LV
Formerly known as Milamar ICO Primer LV
100% solids, low viscosity penetrating epoxy primer/sealer that can be applied to dry or partially damp surfaces
-
PPG FLOORING DECORATIVE FLAKE
PPG Flooring Decorative Flake additive is a decorative, multi-colored blend of vinyl flake designed for use in conjunction with the installation of the PPG Flooring Self-Leveling floor coating system. The PPG Flooring Decorative Flake vinyl flake additive is installed as a sprinkle or full broadcast application over freshly applied PPG Flooring Self-Leveling Epoxy.
-
PPG FLOORING EPOXY SILOXANE SATIN
This two-component, high performance epoxy siloxane topcoat is low VOC and provides excellent chemical and abrasion resistance.
-
PPG FLOORING MOISTURE MITIGATING PRIMER
PPG Flooring Moisture Mitigating Primer is used to prevent adhesion issues by controlling vapor emissions. This 100% solids, two-component epoxy helps block vapor emissions up to 20 pounds/1000 feet/24 hours per ASTM F1869.
-
PPG FLOORING SELF-LEVELING EPOXY
PPG Flooring Self-Leveling Epoxy is a 100% solids, high-build epoxy floor coating designed to provide seamless application and durability for concrete protection. Combine with decorative flakes, quartz, or non-slip additives to create a non-skid surface.
-
PPG FLOORING SELF-LEVELING URETHANE CEMENT
PPG Flooring Self-Leveling Urethane Cement provides a heavy duty seamless flooring system with higher builds that can be installed at 1/8” – 3/16” and broadcast to rejection with silica sand or quartz to achieve 3/16” – ¼” in thickness. The resulting flooring system offers high durability and resistance to impact, thermal shock, abrasion, chemical and moisture vapor transmission.
-
PPG FLOORING WEAR RESISTANT URETHANE
PPG Flooring Wear Resistant Urethane is a high solids, high durability coating that provides excellent abrasion, chemical, and impact resistance. The flexible, coating offers excellent UV stability in a non-skid Satin finish.
-
PPG NOVAGUARD 5031
Formerly known as Milamar ICO Guard Coating
Ultra high solids, epoxy coating primarily for protecting concrete surfaces in corrosive environments
-
PPG NOVAGUARD 5041 Coating
Formerly known as Milamar ICO Hi Guard Coating
Two-component, 100% solids, chemical resistant novolac epoxy coating.
-
PPG PM 100 Series
100% solids, highly penetrating epoxy primer to provide an excellent mechanical bond
-
PPG QUICK MENDER
Low viscosity, urethane based product designed for rapid repair and priming of concrete and masonry substrates
-
PPG QUICK MENDER X.O.
Superior concrete repair product specially designed to repair or patch horizontal concrete surfaces
-
PPG RAVEN 755
Single component, high-early strength fiber-reinforced underlayment/repair material
-
PPG SL/45
Two-component, 100% solids, self-leveling, flexible modified polyurea control joint filler
-
PPG SL/60
100% solids, self-leveling, flexible modified polyurea control joint filler
-
PPG SL/75
100% solids, self-leveling, flexible modified polyurea control joint filler
-
PPG SL/85
Two-component, 100% solids, self-leveling, rapid curing modified polyurea control joint filler
-
PPG SL/90
Two-component, 100% solids, super-duty semi-rigid, self-leveling, rapid curing modified polyurea control joint filler
-
PPG Supercoat
Two-component, waterborne epoxy floor coating
-
PPG ULTRAPRIME Sealer
One-component, penetrating moisture cure concrete sealer