Restaurants/Breweries/Wineries

AC200 PRIMER RESIN

PPG AC200 Primer is a non-pigmented, low-viscosity acrylic resin

AC313 BINDER RESIN

AC313 Binder Resin is a 100% reactive curing acrylic resin binder coat for self-leveling, broadcasted and troweled mortar systems

PPG FLOORING 100% SOLIDS POLYASPARTIC

PPG Flooring 100% Solids Polyaspartic coating provides application capability up to 20 mils, versatility for interior or exterior use with outstanding durability and protection for resistance to chemicals, stains, and damaging UV’s. It is used as a seal coat over broadcast floors of PPG Decorative Flakes or quartz and provides faster return-to-service than 100% solids epoxy topcoats.

PPG FLOORING 610 SL

Two-component, self-priming and self-leveling epoxy coating

PPG FLOORING 688 POLYASPARTIC

Two-component, aliphatic polyurea/polyaspartic floor coating

PPG Flooring 833 CR

Formerly known as Milamar 3300 CR Flooring System

Three-component, floor coating system designed for trowel application

PPG FLOORING 912 LV

Formerly known as Milamar ICO Primer LV

100% solids, low viscosity penetrating epoxy primer/sealer that can be applied to dry or partially damp surfaces

PPG FLOORING DECORATIVE FLAKE

PPG Flooring Decorative Flake additive is a decorative, multi-colored blend of vinyl flake designed for use in conjunction with the installation of the PPG Flooring Self-Leveling floor coating system. The PPG Flooring Decorative Flake vinyl flake additive is installed as a sprinkle or full broadcast application over freshly applied PPG Flooring Self-Leveling Epoxy.

PPG FLOORING MOISTURE MITIGATING PRIMER

PPG Flooring Moisture Mitigating Primer is used to prevent adhesion issues by controlling vapor emissions. This 100% solids, two-component epoxy helps block vapor emissions up to 20 pounds/1000 feet/24 hours per ASTM F1869.

PPG FLOORING SELF-LEVELING URETHANE CEMENT

PPG Flooring Self-Leveling Urethane Cement provides a heavy duty seamless flooring system with higher builds that can be installed at 1/8” – 3/16” and broadcast to rejection with silica sand or quartz to achieve 3/16” – ¼” in thickness. The resulting flooring system offers high durability and resistance to impact, thermal shock, abrasion, chemical and moisture vapor transmission.

PPG NOVAGUARD 5041 Coating

Formerly known as Milamar ICO Hi Guard Coating

Two-component, 100% solids, chemical resistant novolac epoxy coating.