Infrastructure & Rail Case Studies
Filter Case Studies
-
Case study | PSX 700
The second Wuhu Yangtze bridge, China
Our PPG PSX 700FD system was chosen to protect this bridge against UV rays, dirt, exhaust fumes and other corrosive forces, such as pollutants, moistures, acid, nitric gas and sulfur in the air.
-
Case study | PSX 700
Adelaide Oval Stadium, Australia
Long-lasting corrosion protection, exceptional color and gloss retention, visual appearance, and the preservation of the Oval's heritage were key factors in the client's specification. To satisfy these requirements, PPG recommended PPG PSX 700 providing stunning aesthetics and durable corrosion protection.
-
Case study | PSX 700
Burnett River bridge, Australia
PPG PSX 700 restores 100-year-old historic landmark to its former glory. RoadTek was looking for an easy to apply coating solution that would protect this landmark against corrosion, with high-gloss aesthetics. The PPG PSX 700 coating system met those needs.
-
Case study | STEELGUARD
Wembley stadium, London, UK
The challenge for this project was to provide an extremely durable anticorrosive and fire protective coating system that would meet all British fire protection standards, while producing an attractive finish to complement the structure’s visual appeal.
-
Case study | STEELGUARD
Résidence Palace, Belgium
PPG Protective & Marine Coatings worked with the steel contractor, International Metal Works (IMW) to secure the project. About 3,000 tons of steel was protected with cementitious material, with the rest needing a thin-film intumescent coating because of the building's visual appearance.
-
Case study | STEELGUARD
Atocha railway station, Spain
Aesthetics and durable fire protection were key factors in this contractor choosing the STEELGUARD coating system. The water-based intumescent coating also met the corrosion protection and decorative appearance specifications of this project, giving the structure a sleek, modern look.
-
Case study | SIGMAFAST 278
MBK, Invista, The Netherlands
PPG provided a robust, competitive protective solution for this new-build project with the PPG SIGMAFAST 278 system. Its innovative phenalkamine technology, low VOC content and two-layer application were major factors in the customer’s decision.
-
Case study | PSX 700
Simonds stadium, Australia
The PPG PSX 700 Epoxy Polysiloxane system was chosen to provide long term corrosion protection and high abrasion resistance at Simonds Stadium, a high traffic sporting and entertainment venue. Our advanced coating system fulfilled the aesthetic and practical demands of the builders and architects with a high quality finish. We played an integral part in linking both the builder's and the architect’s exacting requirements.
-
Case study | PSX 700
Te Wharekura school, New Zealand
A school in New Zealand needed a durable and cost-effective coating system on the steel support structure for their school playground sunshade. A two coat system of PPG PSX 700 engineered polysiloxane topcoat was applied over the PPG SIGMAZINC 109HS zinc-rich epoxy primer, saving on application time and costs while providing high level protection for steel. This safeguarded the structure from corrosion and thus, the students from the sun.
-
Case study | PSX 805
Chicago restaurant, USA
A Chicago restaurant got a new window facade with PSX technology which provided direct-to-metal application for a quicker result. Bader Art and Fabrication partnered with PPG to find an effective solution that could also meet their aggressive timescales. PPG PSX 805 was chosen because the customer wanted a unique colour with a satin finish.
-
Case study | SIGMACOVER
Padma bridge, Bangladesh
Our systems enabled us to save project time in order to meet the customer’s tight deadline. The customer benefited from increased efficiency during application despite the structure’s complexity. Our proposal incorporated systems for both the girdle interior and exterior.
-
Case study | PSX 700
Anna Maeres Velodrome, Australia
The PPG PSX® 700 two-coat system delivered improved productivity and superior adhesion and abrasion resistance over traditional systems. PPG met the challenge of providing exceptional color and gloss performance, an extended life cycle and an outstanding finish to match the architects’ vision. Our system's high-quality, cost-effective protective coating offered easy and efficient application.
-
Case study | PSX 700
Missouri River bridge, USA
PPG ensured cost efficiency on a high profile project with excellent gloss retention and abrasion resistance systems. Saffo Contractors were looking for ways to expedite the schedule and still deliver a quality job and knew PPG would have the right solutions. The contractors were particularly impressed with the level of technical support they received at every stage of the project.
-
Case study | PSX 700
Earth and Oceans Science building, Canada
The PSX® 700 system ensured excellent protection for the exterior and interior of this impressive structure in Vancouver, Canada. This was a fast tracked project and the university needed a supplier that could deliver quality solutions to meet a tight schedule. Three products were chosen to meet the needs of this coating challenge; PREP 88, AMERLOCK® 400 and PSX® 700.
-
Case study | AMERLOCK 2
Rail box car project, USA
PPG provided outstanding weather and corrosion resistance to restore the historical 1943 Caboose with AMERLOCK® 2's fast drying self-priming action, along with AMERCOAT® 450H. The town were looking for a longer life coating system and were introduced to this epoxy/polyurethane combination. These products saved the town time and cost and offered an extended life on their historic piece.
-
Case study | MEGASEAL
Airport hangar floor, Canada
MegaSeal™ SL was selected because it is highly reflective with a durable, chemical and abrasion resistant finish that is also easy to clean. The PPG epoxy systems offered an anti-slip texture and an attractive, functional finish. The customer is very satisfied with the finished product and plans to use the system again.
-
Case study | PSX ONE
Cyclone Roller Coaster in New York, USA
PSX® ONE, with its superior color and gloss retention and durability, restored the 1927 world famous Cyclone roller coaster. The PPG products selected for this project will continue to block stains and provide protection from environmental hazards. The structure will be preserved and easier to maintain. The one-component acrylic siloxane that was used combines performance, color and finish in one single component.
-
Case study | PSX 700
Rail box car, GATX Leasing, USA
GATX Leasing wanted a color and gloss product that will maintain its attractive finish for many years. Visual impact was particularly important for this project because this structure is used to attract attention and create awareness to increase public donations. PSX®700's excellent gloss and color retention provided a stunning finish that will serve the needs of the John G. Shedd Aquarium for years to come.
-
Case study | PSX 700, AMERCOAT 68HS
Raiders Stadium Las Vegas
Allegiant Stadium is a global events destination with a distinctive black and silver exterior and spectacular views of the Las Vegas Strip. PPG had to match these key colors and ensure this stadium reflected the visually stunning aesthetic that would be expected of a Las Vegas destination. This project required a tight adherence to deadlines, so coatings that would be easy to apply with long-lasting protection were necessary.
-
Case study | PSX 805
Botanical Garden, USA
Hillsdale Fabricators needed a coating with fast throughput, excellent durability, and outstanding aesthetics, which they found in PPG AMERCOAT® 68HS and PPG PSX 805. This easy to apply, two-coat system has a quicker dry time and faster throughput than the previous coating system, allowing Hillsdale Fabricators to complete a faster production schedule.
-
Case Study | SANISHIELD 3000
Hiland Dairy, USA
Hiland Dairy has been a fixture in the Midwest for over 80 years, providing a full array of dairy products to customers in 7 different states. Hiland operates 17 processing plants and 51 distribution centers across the region, from Nebraska to Texas.
-
Case study | STEELGUARD
LG battery plant, Poland
LG Chem electric vehicle battery plant in Poland required a cellulosic passive fire protection (PFP) coating solution for a huge factory. After extensive consultation with all parties involved in the project, the PPG STEELGUARD 651 cellulosic waterborne PFP coating was recommended.
-
Case Study | PSXONE
Toronto Radio Tower in Toronto, Canada
Tower Power Group was given the task to coat a Police Communication Tower that was over 300 meters high late in the year as temperatures began to drop. The coatings system of PPG AMERLOCK® 2 and PPG PSX ONE offered low cure temperatures and the quick turnaround time needed to complete this project.