Fossil
Fossil
Our proven systems provide long-term asset protection for a range of fossil power generation sources including coal, natural gas, and combined cycle, with products that protect and prolong the working life of plant assets, including the feed system to the turbine, recovery, exhaust, and water handling.
50 Product Results
-
7-LINE | 7-282 SERIES
One-component, interior / exterior industrial gloss oil alkyd
-
7-LINE | 7-824 SERIES
One-component, alkyd / oil resin
-
AMERCOAT 133
Solvent Free Cycloaliphatic Amine Tank Lining
-
AMERCOAT 253
Novolac epoxy tank lining
-
AMERCOAT 450 HSG
Semi-gloss Aliphatic Polyurethane Topcoat (450 Series)
-
AMERCOAT 68 HS VOC
Low VOC Zinc Rich Epoxy Primer
-
AMERCOAT 78 HB
Two-component, amine-cured coal tar epoxy
-
AMERCOAT D9
Two-component, moisture-curing zinc (ethyl) silicate coating
-
AMERSHIELD VOC
Low VOC Polyester Acrylic Polyurethane
-
AMERTHANE 490
Aromatic Polyurethane Hybrid
-
DIMETCOTE 9 VOC
Inorganic Zinc Silicate Primer
-
DURETHANE DTM | 95-3300
Two-component, DTM urethane mastic
-
MEGASEAL HPU
(also branded as AMERSHIELD™ VOC)
High performance urethane floor coating
-
MEGASEAL HSPC
MegaSeal HSPC is a low viscosity, solvent free, two-component epoxy primer / sealer. MegaSeal HSPC enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and pinholes that may occur when coating porous surfaces.
-
MEGASEAL SL
MegaSeal SL is a spreadable, self-leveling epoxy floor coating for concrete floor protection where a smooth, cleanable floor surface is required. MegaSeal FLK Flake Additive decorative vinyl chips or MegaSeal QTZ Quartz Additive may be used with MegaSeal SL for an attractive, durable finish.
-
MEGASEAL TF
(also branded as AMERLOCK® 2 VOC)
Thin film epoxy floor coating
-
NOVAGUARD 260
Two-component, high-build, amine adduct-cured novolac phenolic epoxy primer/coating
-
NOVAGUARD 4801
Two-component, glass flake reinforced novolac vinyl ester
-
NOVAGUARD 840
Two-component, solvent-free, amine-cured novolac phenolic epoxy coating
-
PHENGUARD 930/935/940
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating
-
PHENGUARD SUBSEA 610
Two-component, high-build, amine adduct-cured novolac phenolic epoxy primer
-
PITT-TECH | 90-374 SERIES
One-component, int./ext gloss DTM Industrial enamel
-
PITT-TECH | 90-474 SERIES
One-component, int./ext. satin DTM industrial enamel
-
PITT-TECH | 90-712 SERIES
One-component, int./ext. DTM industrial primer
-
PITT-TECH | 90-812 SERIES
Int./Ext. acrylic dry fall
-
PITT-TECH PLUS | 90-1110 SERIES
One-component, int./ext. satin DTM industrial enamel
-
PPG HI-TEMP 1000
One component, heat-resistant, universal silicone topcoat for use in elevated temperature systems. Replaces HI-TEMP 1000 V / VS / VHA
-
PPG HI-TEMP 1027
One-component, high-build heat-resistant inert multipolymeric matrix / inorganic ceramic coating
-
PPG HI-TEMP 1027 HD
Two-component, ambient cured multi-polymeric heat resistant coating system
-
PPG HI-TEMP 222 G
One-component, high-build multi-polymeric composite heat resistant coating to prevent corrosion of insulated and non-insulated carbon steel and stainless steel to temperatures up to 232°C (450°F) and for cryogenic service on stainless steel from -185°C to 232°C (-300°F to 450°F). Also to be used as a primer with PPG HI-TEMP topcoats and with the PPG HI-TEMP 707 HB or PPG HI-TEMP 808 liquid insulation system.
-
PPG HI-TEMP 500
One component, heat-resistant, universal silicone acrylic topcoat for use in elevated temperature systems. Replaces HI-TEMP 500 V / VS / VHA
-
PPG HI-TEMP 707 HB
One component proprietary waterborne liquid insulation that provides thermal resistance and personnel protection up to 177°C (350°F)
-
PPG HI-TEMP 900
Two-component, ambient cured multi-polymeric heat resistant primer/coat for new build applications
-
PPG PITT-CHAR NX
Two-component, 100% solids, flexible, epoxy intumescent fire protective coating for use in industries such as oil & gas, chemicals, energy, transportation and defence that potentially involve major accident hazards including explosions, hydrocarbon jet and pool fires. Also provides Cryogenic Spill Protection (CSP) requirements on LNG facilities.
-
SFT 625
Single component, high traffic, pedestrian grade anti-slip coating
-
SIGMACOVER 256
Two-component, high-build, polyamide-cured recoatable zinc phosphate epoxy primer
-
SIGMACOVER 280 US
Two-component, polyamide-cured epoxy primer
-
SIGMACOVER 300
Two-component, high-build, polyamine adduct-cured, coal tar epoxy coating
-
SIGMACOVER 690
Two-component high solids aluminum pigmented polyamine cured modified epoxy primer/coating
-
SIGMAFAST 210 HS
Two-component, high solids, high-build zinc phosphate polyurethane primer/finish
-
SIGMAFAST 329 BR
Two-component, high-build zinc phosphate epoxy primer/coating
-
SIGMAGUARD 720
Two-component, reinforced high solids tank coating, based upon polyamine adduct cured pure epoxy technology
-
SIGMAGUARD 730
Two-component, high solids polyamine cured phenolic epoxy coating
-
SIGMARINE 24
Modified zinc phosphate alkyd primer
-
SIGMASHIELD 1090
Two-component, ultra high-build, flint-reinforced, solvent-free, polyamine-cured, epoxy compound
-
SIGMATHERM 230
Two-component, high-build, heat-resistant epoxy phenol novolac coating
-
SIGMATHERM 350
Heat-resistant silicone/acrylic finish
-
SIGMATHERM 540
One-component, heat-resistant, moisture-curing silicone aluminum
-
SIGMAZINC 109G
Two-component, high solids polyamide cured zinc rich epoxy primer
-
VIGOR ZN 302 SR
Two-component, silicate zinc epoxy primer