Water & Wastewater
Water & Wastewater
Protect water and waste assets with coatings that provide a resilient barrier, supporting long-term asset protection and decreasing maintenance cost for areas such as treatment facilities, water storage tanks, potable water, storm sewers and wastewater transmission pipelines.
36 Product Results
-
AMERCOAT 133
Solvent Free Cycloaliphatic Amine Tank Lining
-
AMERCOAT 333
Solvent Free Cycloaliphatic Amine Tank Lining
-
AMERCOAT 68 HS VOC
Low VOC Zinc Rich Epoxy Primer
-
AMERLOCK 2 VOC
VOC Compliant Fast Dry, High Solids Epoxy Coating
-
AMERTHANE 490
Aromatic Polyurethane Hybrid
-
AQUAPON LT | 95-172 SERIES
Two-component, low temperature epoxy coating
-
DURETHANE MCZ
Two-component, moisture curing urethane zinc primer
-
NOVAGUARD 260
Two-component, high-build, amine adduct-cured novolac phenolic epoxy primer/coating
-
NOVAGUARD 4801
Two-component, glass flake reinforced novolac vinyl ester
-
NOVAGUARD 810 ER
Two-component, solvent-free, amine rapid-cured novolac phenolic epoxy coating
-
NOVAGUARD 840
Two-component, solvent-free, amine-cured novolac phenolic epoxy coating
-
PHENGUARD 930
Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer
-
PHENGUARD 930/935/940
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating
-
PHENGUARD 935
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating
-
PHENGUARD 940
Two-component, high-build, amine adduct-cured novolac phenolic epoxy finish
-
PHENGUARD 965
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating
-
PHENGUARD 985
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating
-
PITTHANE ULTRA LS
Two-component, low sheen aliphatic acrylic polyurethane
-
PITT-TECH | 90-374 SERIES
One-component, int./ext gloss DTM Industrial enamel
-
PITT-TECH | 90-474 SERIES
One-component, int./ext. satin DTM industrial enamel
-
PITT-TECH | 90-712 SERIES
One-component, int./ext. DTM industrial primer
-
PITT-TECH | 90-812 SERIES
Int./Ext. acrylic dry fall
-
PPG AQUATAFLEX 505
100% solids epoxy/polyurethane/polyurea hybrid coating designed for fast curing and high chemical resistance
-
PPG AQUATAFLEX 506
100% solids epoxy/polyurethane/polyurea hybrid coating designed for fast curing and high chemical resistance
-
PPG RAVEN 150
Two-component, 100% solids, epoxy adhesive bonding intermediate for thermoplastics
-
PPG RAVEN 155
Two-component, high-early strength penetrating epoxy primer/sealer for new and existing concrete
-
PPG RAVEN 171FS
100% solids, low viscosity penetrating epoxy primer/sealer that can be applied to dry or partially damp surfaces
-
PPG RAVEN 175
Two-component, low odor, penetrating primer sealer for concrete
-
PPG RAVEN 405
100% solids epoxy coating for use as a corrosion protection and structural enhancement lining system
-
PPG RAVEN 755
Single component, high-early strength fiber-reinforced underlayment/repair material
-
PPG Raven 760
Three-component high performance epoxy-modified cement mortar resurfacing material.
-
PPG RESTORA-PIPE 202
Two-component, fast-curing, structural polymer coating
-
SIGMACOVER 300
Two-component, high-build, polyamine adduct-cured, coal tar epoxy coating
-
SIGMAGUARD CSF 575
Two-component, solvent-free, amine-cured modified epoxy coating
-
SIGMAGUARD CSF 585
Two-component, solvent-free, amine-cured epoxy coating
-
SIGMALINE 523
Two-component, solvent-free, polyamine-adduct cured, epoxy coating